
Walnut reeded reading wall
A floor-to-ceiling panel of half-round black walnut reeds, 1.5m wide, that turns one end of a study into a reading corner: a floating walnut book shelf over the chair, a thick little shelf at armrest height that does the job of a side table, and a brass swing-arm light screwed through the reeds, all standing on a solid walnut plinth. Nothing stands on the floor but the chair, so the corner works in a room too small for a side table and a floor lamp.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1500 x 311 x 2500 mm59 1/16" x 12 1/4" x 98 7/16"
- Parts to cut
- 62
- Build steps
- 23
- Boards
- 55
- Sheets
- 4
- Solid wood
- 36.4 bd ft
- Weight
- 98.5 kg217 lb
Materials
- Black walnut
- Pine (eastern white)
- MDF
Finish
- Finishing oil - Hardwax oil, satin
- Paint - black, matte
Tools
- Saw
- Square
- Tape
- Drill
- Clamps
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 3 x Concealed floating-shelf bracket, two 12mm steel rods on a stud plate
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 1 x Plug-in swing-arm reading light, brushed brass
Cut list
The first 3 of 7 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 50 | Panel - Slat | 2500 x 30 x 1598 7/16" x 1 3/16" x 9/16" | Black walnut |
| B | 1 | Walnut plinth | 1500 x 110 x 4059 1/16" x 4 5/16" x 1 9/16" | Black walnut |
| C | 1 | Floating book shelf | 900 x 220 x 4035 7/16" x 8 11/16" x 1 9/16" | Black walnut |
| +10 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 62 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 23 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
