
Terracotta arch reading nook
A kids’ reading nook built around a painted terracotta arch: a cushioned bench with two big toy drawers in front of it, a swing-arm light for bedtime stories, and on each side a shallow birch tower of forward-facing book ledges with maple lips, so covers face out at a child’s height and choosing a book is half the fun.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 2200 x 463 x 1850 mm86 5/8" x 18 1/4" x 72 13/16"
- Parts to cut
- 58
- Build steps
- 51
- Boards
- 2
- Sheets
- 5
- Solid wood
- 2.1 bd ft
- Weight
- 124.9 kg275 lb
Materials
- Birch plywood
- Hard maple
Finish
- Paint - terracotta clay, matte
- Clear finish - Water-based clear lacquer, matt, toy-saf
Tools
- Saw
- Square
- Tape
- Router
- Drill
- Clamps
- Table saw
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x Box cushion, 90mm foam, in a washable oatmeal cover
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 4 x Side-mount drawer slide, 350mm
- 2 x Cup pull, 96mm centres, brushed brass
- 1 x Plug-in swing-arm reading light, matt black
Cut list
The first 3 of 36 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Arch panel | 1850 x 1200 x 1872 13/16" x 47 1/4" x 11/16" | Birch plywood |
| B | 2 | Flank left - Side | 1500 x 144 x 1859 1/16" x 5 11/16" x 11/16" | Birch plywood |
| C | 1 | Flank left - Back | 1500 x 500 x 659 1/16" x 19 11/16" x 1/4" | Birch plywood |
| +54 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 58 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 51 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
