
Maple building-brick table with bins
A child-height building table with six baseplates set inside a raised maple rim, so bricks stay on the table instead of underfoot, and eight colour-coded bins that slide out on maple runners from both long sides - sort by colour, tip a bin onto the top, slide it back. A plywood shelf below takes the big boxes and the half-built models.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1000 x 620 x 522 mm39 3/8" x 24 7/16" x 20 9/16"
- Parts to cut
- 59
- Build steps
- 30
- Boards
- 5
- Sheets
- 3
- Solid wood
- 5.3 bd ft
- Weight
- 32.1 kg71 lb
Materials
- Birch plywood
- Hard maple
Finish
- Finishing oil - Hardwax oil, matt, toy-safe, satin
- Clear finish - Water-based clear lacquer, matt, toy-saf, matte
- Paint - mustard, toy-safe, satin
- Paint - tomato red, toy-safe, satin
- Paint - deep teal, toy-safe, satin
- Paint - sky blue, toy-safe, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Drill
- Dowel jig
- Router
- Table saw
- Sandpaper
- Brush
Hardware and fittings
- 6 x Building-brick baseplate, 32 x 32 studs, 255mm square, sage grey
Cut list
The first 3 of 27 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Top | 1000 x 620 x 1839 3/8" x 24 7/16" x 11/16" | Birch plywood |
| B | 1 | Lower shelf | 900 x 560 x 1835 7/16" x 22 1/16" x 11/16" | Birch plywood |
| C | 4 | Bin 1 side | 270 x 122 x 910 5/8" x 4 13/16" x 3/8" | Birch plywood |
| +53 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 59 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 30 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
