
Shaker peg rail bench
A Shaker-style entry settle: a barn-red pine bench with three boot cubbies under a solid cherry seat, and cherry posts rising behind it to carry a backrest rail, a row of six turned cherry pegs and a hat shelf on top.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1240 x 447 x 1845 mm48 13/16" x 17 5/8" x 72 5/8"
- Parts to cut
- 21
- Build steps
- 32
- Boards
- 9
- Sheets
- 1
- Solid wood
- 28.9 bd ft
- Weight
- 42.9 kg95 lb
Materials
- Cherry
- Pine (eastern white)
- Birch plywood
Finish
- Finishing oil - Hardwax oil, matt
- Paint - barn red, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Drill
- Sandpaper
- Brush
Hardware and fittings
- 1 x Bench cushion, 60mm foam in oatmeal linen with piped edge and ties
- 1 x Anti-tip furniture wall bracket, steel, with stud screws
Cut list
The first 3 of 13 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Bench - Back | 420 x 1200 x 616 9/16" x 47 1/4" x 1/4" | Birch plywood |
| B | 2 | Post | 1820 x 44 x 4471 5/8" x 1 3/4" x 1 3/4" | Cherry |
| C | 1 | Seat | 1240 x 400 x 4048 13/16" x 15 3/4" x 1 9/16" | Cherry |
| +17 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 21 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 32 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
