
Oak slat drop-zone wall
A hallway landing strip in oiled red oak: a slatted wall over a charcoal backer with five brass hooks, a floating two-drawer drop zone for keys and post that glows warm underneath, a low two-tier shoe shelf on the floor and a hat shelf up top.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1000 x 360 x 2300 mm39 3/8" x 14 3/16" x 90 9/16"
- Parts to cut
- 61
- Build steps
- 45
- Boards
- 34
- Sheets
- 3
- Solid wood
- 37.7 bd ft
- Weight
- 96.7 kg213 lb
Materials
- Red oak
- Birch plywood
- Pine (eastern white)
- MDF
Finish
- Finishing oil - Hardwax oil, matt
- Paint - charcoal, matte
Tools
- Saw
- Square
- Tape
- Router
- Drill
- Clamps
- Table saw
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x LED strip, 2700K, 12V, in an aluminium channel with a frosted diffuser
- 1 x 12V dimmable LED driver, 24W, slim
- 5 x Single coat hook, solid brass, ball end
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 4 x Side-mount drawer slide, 250mm
Cut list
The first 3 of 26 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Drop left - Drawer 1 box | 426.5 x 90 x 1216 13/16" x 3 9/16" x 1/2" | Birch plywood |
| B | 1 | Drop left - Drawer 1 bottom | 426.5 x 238 x 616 13/16" x 9 3/8" x 1/4" | Birch plywood |
| C | 2 | Drop right - Drawer 1 box | 426.5 x 90 x 1216 13/16" x 3 9/16" x 1/2" | Birch plywood |
| +56 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 61 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 45 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
