• Table
• Dining
• Oak

Shaker oak dining table

A Shaker-style 1800 x 900mm table with tapered legs, mortise and tenon aprons and a 30mm top with softened edges, which seats six without crowding.

Open this design in Crava

Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.

At a glance

Overall W x D x H

1800 x 900 x 750 mm70 7/8" x 35 7/16" x 29 1/2"

Parts to cut

9

Build steps

11

Boards

5

Solid wood

30.3 bd ft

Weight

50.3 kg111 lb

Materials

• White oak

Tools

• Saw
• Square
• Tape
• Chisel
• Clamps
• Router
• Drill
• Sandpaper
• Brush

Cut list

The first 3 of 4 lines, in millimetres (inches below), finished size including joint allowances.

The 3D model

More kitchen & dining designs

• Walnut mug tree with maple pegs A tapered walnut post tenoned into a half-lapped cross foot, with six hard maple pegs glued in at 28 degrees, two to a level and each level turned a quarter so the mugs never clash. Six mugs hang in a 230mm square of counter instead of a shelf of cupboard, handles out and ready, and they drip-dry upside down after washing.
• Freestanding stemware rack A white oak stand, 460 x 300mm and 330mm tall, with eight rails tenoned into a deep back crossbar and left open at the front, 17mm apart. Wine glasses slide in upside down by the stem with their feet bridging two rails, so twenty hang bowl-down out of the dust; they drip-dry straight after washing with no water pooling in the bowls and no rims chipping in a cupboard, and it needs no wall cabinet to hang from.
• Oat Craftsman wainscot with cherry plate ledge A tall Craftsman wainscot for a dining room: wide flat stiles, a deep base rail and a frieze rail in oat-coloured paint on an MDF ground, topped at 1.47m by an oiled cherry plate ledge with a stop bead, carried on six cove-cut cherry corbels. Serving platters and the good plates live on the wall instead of in a cupboard, and the wainscot takes every chair-back knock below.

All designs