
Rust record wall
A wall for a vinyl collection: a long, low run of rust-orange cubbies each sized for a 12-inch record, oak-fronted cupboards in the middle for the amp, a solid oak top for the turntable, and two lipped oak ledges above, carried on slim oak uprights, where the favourite sleeves go on show.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 2160 x 422 x 1723 mm85 1/16" x 16 5/8" x 67 13/16"
- Parts to cut
- 39
- Build steps
- 44
- Boards
- 8
- Sheets
- 3
- Solid wood
- 22.1 bd ft
- Weight
- 107.8 kg238 lb
Materials
- Birch plywood
- White oak
Finish
- Finishing oil - Hardwax oil, matte
- Paint - rust, satin
Tools
- Saw
- Square
- Tape
- Router
- Drill
- Dowel jig
- Clamps
- Sandpaper
- Brush
Hardware and fittings
- 3 x Anti-tip furniture wall bracket, steel, with stud screws
- 4 x Concealed cabinet hinge, full overlay
- 2 x Edge pull, 150mm, brushed brass
Cut list
The first 3 of 32 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Left - Side | 800 x 394 x 1831 1/2" x 15 1/2" x 11/16" | Birch plywood |
| B | 1 | Left - Back | 800 x 720 x 631 1/2" x 28 3/8" x 1/4" | Birch plywood |
| C | 2 | Middle - Side | 800 x 374 x 1831 1/2" x 14 3/4" x 11/16" | Birch plywood |
| +34 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 39 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 44 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
