
Maple lit slat wall with floating shelf
A living-room wall of oiled maple slats on a charcoal backer, floor to ceiling and only 50mm deep, with two warm LED lines running up it and a floating maple shelf between them, lit underneath. It lights the seating end of the room without a single floor lamp or trailing cable, and the shelf holds art at the right height over the back of a sofa.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 2400 x 260 x 2600 mm94 1/2" x 10 1/4" x 102 3/8"
- Parts to cut
- 51
- Build steps
- 18
- Boards
- 47
- Sheets
- 4
- Solid wood
- 46.7 bd ft
- Weight
- 135.8 kg299 lb
Materials
- Hard maple
- Pine (eastern white)
- MDF
Finish
- Finishing oil - Hardwax oil, natural matt
- Paint - charcoal, matte
Tools
- Saw
- Square
- Tape
- Drill
- Clamps
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 3 x Concealed floating-shelf bracket, two 12mm steel rods on a stud plate
- 1 x LED strip in a slim aluminium channel with opal diffuser, 24V, 2700K
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 2 x LED strip in a recessed aluminium channel with opal diffuser, 24V, 2700K
- 1 x 24V dimmable LED driver, plug-in
Cut list
The first 3 of 5 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 41 | Panel - Slat | 2600 x 40 x 20102 3/8" x 1 9/16" x 13/16" | Hard maple |
| B | 1 | Floating shelf | 1100 x 210 x 4543 5/16" x 8 1/4" x 1 3/4" | Hard maple |
| C | 2 | Panel - Backer 1 | 1300 x 1200 x 1251 3/16" x 47 1/4" x 1/2" | MDF |
| +7 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 51 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 18 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
