
Red oak charging sofa console
A sofa-back console in honey-toned red oak, only 260mm deep and 720mm high so it tucks behind a sofa floated off the wall: sockets and USB chargers set flush in the top, a hidden wireless pad at one end and a cable tray underneath. It takes the place of side tables and trailing extension leads, and turns the back of the sofa into a lamp table, a drop for phones and a low shelf for baskets.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1600 x 260 x 722 mm63" x 10 1/4" x 28 7/16"
- Parts to cut
- 18
- Build steps
- 25
- Boards
- 6
- Solid wood
- 13.5 bd ft
- Weight
- 52.2 kg115 lb
Materials
- Red oak
Finish
- Finishing oil - Hardwax oil, natural satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Drill
- Dowel jig
- Sandpaper
- Brush
Hardware and fittings
- 1 x Recessed desk power module: two sockets, one USB-A and one USB-C charger
- 1 x Under-desk steel mesh cable tray, 600mm
- 1 x Under-surface wireless phone charger, works through up to 30mm of wood
Cut list
The first 3 of 9 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Top | 1600 x 260 x 3063" x 10 1/4" x 1 3/16" | Red oak |
| B | 2 | Apron | 1506 x 90 x 2059 5/16" x 3 9/16" x 13/16" | Red oak |
| C | 2 | Shelf rail | 1506 x 45 x 2059 5/16" x 1 3/4" x 13/16" | Red oak |
| +13 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 18 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 25 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
