
Floating oak shelves with lights
A Scandinavian trio of oiled white oak shelves — clean, warm, and lit from within — that sit like they grew out of the sage green wall.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 900 x 220 x 800 mm35 7/16" x 8 11/16" x 31 1/2"
- Parts to cut
- 3
- Build steps
- 9
- Boards
- 1
- Solid wood
- 7.3 bd ft
- Weight
- 49 kg108 lb
Materials
- White oak
Finish
- Finishing oil, satin
Tools
- Saw
- Square
- Tape
- Drill
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x Steel wall anchor plate, pre-drilled for M10 bracket rods and countersunk wall-stud screws
- 1 x Aluminium LED strip channel extrusion with frosted diffuser, 15 × 10mm profile
- 1 x Warm white LED strip, 2700 K, 12 V, adhesive-backed
- 1 x Invisible floating shelf bracket — threaded M10 steel rod with wall-plate nut
- 1 x 12 V dimmable LED driver, trailing-edge dimmer compatible
Cut list
The first 3 of 3 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Bottom shelf | 900 x 214 x 3035 7/16" x 8 7/16" x 1 3/16" | White oak |
| B | 1 | Shelf | 900 x 214 x 3035 7/16" x 8 7/16" x 1 3/16" | White oak |
| C | 1 | Top shelf | 900 x 214 x 3035 7/16" x 8 7/16" x 1 3/16" | White oak |
Open this design in Crava to see the full cut list and plans - all 3 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 9 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
