
Powder blue fold-down wall desk
A whole desk that hangs on the wall only 220mm deep: the powder blue front drops on brass stays into a 580mm-deep writing surface at 730mm, opening up oiled oak pigeonholes lit by a warm strip, then folds back up into a flat cabinet when the working day ends. It replaces a desk and a chair-sized slice of floor in a studio flat.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 900 x 800 x 620 mm35 7/16" x 31 1/2" x 24 7/16"
- Parts to cut
- 17
- Build steps
- 31
- Boards
- 2
- Sheets
- 2
- Solid wood
- 3.6 bd ft
- Weight
- 23.2 kg51 lb
Materials
- Birch plywood
- White oak
- Poplar (paint grade)
Finish
- Paint - powder blue, satin
- Finishing oil - Hardwax oil, matt
Tools
- Saw
- Square
- Tape
- Router
- Drill
- Clamps
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x Wool felt desk pad, 3mm, charcoal
- 2 x Brass lid stay, soft-down, 300mm
- 1 x Brass piano hinge, 32mm open width
- 1 x Push-to-open magnetic touch latch
- 1 x Plug-in LED strip kit, 12V, warm white 2700K
Cut list
The first 3 of 12 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Case - Bottom | 882 x 178 x 1834 3/4" x 7" x 11/16" | Birch plywood |
| B | 1 | Case - Top | 882 x 178 x 1834 3/4" x 7" x 11/16" | Birch plywood |
| C | 1 | French cleat, case half | 864 x 80 x 1834" x 3 1/8" x 11/16" | Birch plywood |
| +14 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 17 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 31 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
