
Oak standing desk with a cobalt pegboard
A thick oiled oak top on an electric sit-stand frame, in front of a floor-to-ceiling wall of cobalt-blue pegboard where oak pegs hold three little shelves at whatever height you like. The board is screwed to battens on the wall, so every peg can carry a shelf, a pair of headphones or a bag.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1600 x 800 x 2400 mm63" x 31 1/2" x 94 1/2"
- Parts to cut
- 9
- Build steps
- 26
- Boards
- 5
- Sheets
- 2
- Solid wood
- 20.9 bd ft
- Weight
- 94 kg207 lb
Materials
- White oak
- Poplar (paint grade)
- Birch plywood
Finish
- Finishing oil - Hardwax oil, matt
- Paint - cobalt blue, satin
Tools
- Saw
- Square
- Tape
- Drill
- Dowel jig
- Clamps
- Sandpaper
- Brush
Hardware and fittings
- 1 x Brass desk cable grommet
- 10 x Oak pegboard dowel pegs, 20mm, with tapered tenon
- 1 x Sit-stand desk frame, dual motor
Cut list
The first 3 of 8 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Pegboard, sheet | 2400 x 800 x 994 1/2" x 31 1/2" x 3/8" | Birch plywood |
| B | 1 | Wall batten, lower | 1600 x 70 x 2063" x 2 3/4" x 13/16" | Poplar (paint grade) |
| C | 1 | Wall batten | 1600 x 70 x 2063" x 2 3/4" x 13/16" | Poplar (paint grade) |
| +5 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 9 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 26 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
