
Oxblood secretary desk
A tall drop-front secretary lacquered glossy oxblood: three drawers below, a fall front that folds down on brass stays into a tan leather writing surface, oak pigeonholes behind it, and a glass-doored bookcase above under a cove crown. Closed, it is a handsome cabinet; open, a whole desk in a metre of wall.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1112 x 843 x 2160 mm43 3/4" x 33 3/16" x 85 1/16"
- Parts to cut
- 67
- Build steps
- 86
- Boards
- 8
- Sheets
- 7
- Solid wood
- 12.4 bd ft
- Weight
- 136.7 kg301 lb
Materials
- Birch plywood
- Poplar (paint grade)
- White oak
- MDF
Finish
- Paint - oxblood, gloss
- Finishing oil - Hardwax oil, matt
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Table saw
- Chisel
- Pocket-hole jig
- Sandpaper
- Brush
Hardware and fittings
- 1 x Tooled leather desk inlay, tan, gold-tooled border
- 2 x Brass fall-front stay, soft-close
- 1 x Anti-tip furniture wall bracket, steel, with stud screws
- 6 x Side-mount drawer slide, 400mm
- 5 x Round knob, 30mm, brushed brass
- 4 x Concealed face-frame hinge, partial overlay
- 2 x Toughened glass panel, 4mm
- 1 x Cove crown moulding, 80mm
Cut list
The first 3 of 45 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Base - Top | 982 x 456 x 1838 11/16" x 17 15/16" x 11/16" | Birch plywood |
| B | 1 | Desk - Bottom | 982 x 414 x 1838 11/16" x 16 5/16" x 11/16" | Birch plywood |
| C | 1 | Desk - Top | 982 x 414 x 1838 11/16" x 16 5/16" x 11/16" | Birch plywood |
| +64 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 67 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 86 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
