
Butter yellow craft wall
A four-metre craft room wall in soft butter yellow: deep drawers for yarn, a bank of shallow drawers for tools, map drawers for paper and cupboards for fabric bolts, all under a standing-height maple cutting counter with a brass rule set into its front edge. Lit cubbies rise from the counter to the ceiling at each end, with a pegboard, roll rod and maple shelf between them.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 4000 x 652 x 2400 mm157 1/2" x 25 11/16" x 94 1/2"
- Parts to cut
- 204
- Build steps
- 124
- Boards
- 10
- Sheets
- 22
- Solid wood
- 51.8 bd ft
- Weight
- 576.9 kg1272 lb
Materials
- Birch plywood
- MDF
- Hard maple
Finish
- Finishing oil - Hardwax oil, matt
- Clear finish - Water-based lacquer, matt
- Paint - butter yellow, eggshell
Tools
- Saw
- Square
- Tape
- Drill
- Dowel jig
- Clamps
- Router
- Table saw
- Chisel
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x Self-adhesive brass ruler strip, metric
- 38 x Side-mount drawer slide, 550mm
- 19 x Cup pull, 96mm centres, brushed brass
- 4 x Concealed cabinet hinge, full overlay
- 2 x Round knob, 30mm, brushed brass
- 2 x Plug-in LED strip kit, 12V, warm white 2700K
Cut list
The first 3 of 134 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Pegboard | 2000 x 1060 x 978 3/4" x 41 3/4" x 3/8" | Birch plywood |
| B | 2 | Cubbies left - Side | 1490 x 314 x 1858 11/16" x 12 3/8" x 11/16" | Birch plywood |
| C | 1 | Cubbies left - Back | 1490 x 1000 x 658 11/16" x 39 3/8" x 1/4" | Birch plywood |
| +200 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 204 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 124 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
