
Olive filing credenza
A long, low credenza for under the office window, in satin olive with a thick oiled oak top: deep drawers at each end that take hanging files, a pair of plain cupboard doors between them, and the whole case lifted on an oak stand with slender tapered legs. Long brass bar pulls run across every front.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 2040 x 492 x 800 mm80 5/16" x 19 3/8" x 31 1/2"
- Parts to cut
- 54
- Build steps
- 46
- Boards
- 9
- Sheets
- 5
- Solid wood
- 25.9 bd ft
- Weight
- 140.6 kg310 lb
Materials
- Birch plywood
- White oak
- MDF
Finish
- Finishing oil - Hardwax oil, matt
- Paint - olive, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Drill
- Table saw
- Sandpaper
- Brush
Hardware and fittings
- 8 x Side-mount drawer slide, 400mm
- 6 x Bar pull, 128mm centres, brushed brass
- 4 x Concealed cabinet hinge, full overlay
Cut list
The first 3 of 37 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Doors - Bottom | 942 x 436 x 1837 1/16" x 17 3/16" x 11/16" | Birch plywood |
| B | 1 | Doors - Top | 942 x 436 x 1837 1/16" x 17 3/16" x 11/16" | Birch plywood |
| C | 2 | Files left - Side | 520 x 436 x 1820 1/2" x 17 3/16" x 11/16" | Birch plywood |
| +50 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 54 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 46 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
