
Olive window seat
A reading window seat built right across a bedroom bay in smoky olive: two deep drawers under an oiled oak seat and a thick ticking-stripe cushion, bookcases rising either side over shaker cupboards, a cupboard bridging over the window under a cove crown, and a brass swing-arm light on each side for reading after dark.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 3000 x 525 x 2400 mm118 1/8" x 20 11/16" x 94 1/2"
- Parts to cut
- 133
- Build steps
- 109
- Boards
- 10
- Sheets
- 10
- Solid wood
- 25.9 bd ft
- Weight
- 261.4 kg576 lb
Materials
- Birch plywood
- MDF
- Poplar (paint grade)
- White oak
Finish
- Finishing oil - Hardwax oil, matt
- Paint - smoky olive, eggshell
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Table saw
- Drill
- Pocket-hole jig
- Dowel jig
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x Box cushion, 80mm high-density foam, in a removable oatmeal ticking-stripe cover
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 16 x Concealed face-frame hinge, partial overlay
- 8 x Round knob, 30mm, brushed brass
- 4 x Side-mount drawer slide, 450mm
- 2 x Cup pull, 96mm centres, brushed brass
- 1 x Cove crown moulding, 100mm
- 2 x Plug-in swing-arm reading light, brushed brass
Cut list
The first 3 of 100 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Shelves left - Side | 1880 x 295 x 1874" x 11 5/8" x 11/16" | Birch plywood |
| B | 1 | Shelves left - Back | 1880 x 700 x 674" x 27 9/16" x 1/4" | Birch plywood |
| C | 2 | Shelves right - Side | 1880 x 295 x 1874" x 11 5/8" x 11/16" | Birch plywood |
| +128 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 133 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 109 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
