
Oak platform storage bed
A low queen platform bed in oiled white oak, with three deep drawers tucked under the foot behind a shadow-line lip and a floating black kick, and a fluted oak headboard screwed to the wall behind it. Calm and Japanese-leaning, with a whole chest of drawers hiding in plain sight.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1650 x 2150 x 1150 mm64 15/16" x 84 5/8" x 45 1/4"
- Parts to cut
- 104
- Build steps
- 46
- Boards
- 28
- Sheets
- 7
- Solid wood
- 41.7 bd ft
- Weight
- 435 kg959 lb
Materials
- White oak
- Birch plywood
- Pine (eastern white)
- MDF
Finish
- Finishing oil - Hardwax oil, matt
- Paint - shadow black, matte
- Paint - charcoal, matte
Tools
- Saw
- Square
- Tape
- Pocket-hole jig
- Drill
- Router
- Table saw
- Clamps
- Sandpaper
- Brush
Hardware and fittings
- 1 x Your queen mattress, 1525 x 2030mm, up to 250mm thick (not part of this build)
- 6 x Side-mount drawer slide, 500mm
- 3 x Edge pull, 150mm, matt black
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
Cut list
The first 3 of 35 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Deck | 2058 x 803 x 1881" x 31 5/8" x 11/16" | Birch plywood |
| B | 2 | Kick board | 1606 x 80 x 1863 1/4" x 3 1/8" x 11/16" | Birch plywood |
| C | 1 | Spine | 1493 x 340 x 1858 3/4" x 13 3/8" x 11/16" | Birch plywood |
| +99 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 104 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 46 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
