
Ochre three-bin laundry sorter
A counter-height laundry sorter painted deep ochre: three open bays, each with a canvas hamper on a pull-out frame, under a thick hard maple butcher-block top for folding, with a little brass label holder over each bay.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1240 x 464 x 900 mm48 13/16" x 18 1/4" x 35 7/16"
- Parts to cut
- 9
- Build steps
- 20
- Boards
- 2
- Sheets
- 3
- Solid wood
- 9.2 bd ft
- Weight
- 124.1 kg274 lb
Materials
- Birch plywood
- Hard maple
Finish
- Finishing oil - Hardwax oil, matt
- Paint - deep ochre, satin
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Sandpaper
- Brush
Hardware and fittings
- 3 x Canvas laundry hamper bag on a pull-out wire frame with side runners
- 3 x Card label holder, unlacquered brass, 80 x 26mm
Cut list
The first 3 of 7 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Sorter - Top | 1182 x 434 x 1846 9/16" x 17 1/16" x 11/16" | Birch plywood |
| B | 1 | Sorter - Bottom | 1176 x 434 x 1846 5/16" x 17 1/16" x 11/16" | Birch plywood |
| C | 1 | Sorter - Kick board | 1164 x 90 x 1845 13/16" x 3 9/16" x 11/16" | Birch plywood |
| +6 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 9 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 20 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
