
Aubergine low dresser
A long, low nine-drawer dresser painted deep aubergine, with brushed brass edge pulls tucked along the top of every drawer, standing on a recessed white oak sled base under a thick oiled oak top. Wide enough to share, low enough to hang a big mirror or a painting over.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1824 x 523 x 812 mm71 13/16" x 20 9/16" x 31 15/16"
- Parts to cut
- 76
- Build steps
- 39
- Boards
- 5
- Sheets
- 7
- Solid wood
- 16.9 bd ft
- Weight
- 171.9 kg379 lb
Materials
- Birch plywood
- MDF
- White oak
Finish
- Finishing oil - Hardwax oil, matt
- Paint - aubergine, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Drill
- Table saw
- Sandpaper
- Brush
Hardware and fittings
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 18 x Side-mount drawer slide, 450mm
- 9 x Edge pull, 150mm, brushed brass
Cut list
The first 3 of 53 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Col 1 - Side | 690 x 476 x 1827 3/16" x 18 3/4" x 11/16" | Birch plywood |
| B | 1 | Col 1 - Back | 690 x 600 x 627 3/16" x 23 5/8" x 1/4" | Birch plywood |
| C | 2 | Col 2 - Side | 690 x 476 x 1827 3/16" x 18 3/4" x 11/16" | Birch plywood |
| +71 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 76 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 39 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
