
Oak watch box with a glass lid
An oak watch box for eight watches under a glazed lid, so the collection is on show and dust-free at once, with a felt-lined drawer underneath for spare straps, cufflinks and the tools to change them. The drawer runs on maple runners in grooved sides, with no metal slides to take up room.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 380 x 247 x 138 mm14 15/16" x 9 3/4" x 5 7/16"
- Parts to cut
- 19
- Build steps
- 36
- Boards
- 3
- Sheets
- 2
- Solid wood
- 1.2 bd ft
- Weight
- 4.8 kg11 lb
Materials
- White oak
- Birch plywood
- Hard maple
Finish
- Finishing oil - Hardwax oil, natural matt, satin
- Clear finish - Water-based clear lacquer, matt, matte
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Table saw
- Dowel jig
- Sandpaper
- Brush
Hardware and fittings
- 1 x Wool felt, charcoal, 2mm, 50 x 50cm
- 1 x Solid brass mushroom knob, 16mm
- 8 x Watch pillow, charcoal felt over foam, 75 x 65mm
- 1 x Toughened glass, 4mm, polished edges
- 1 x Solid brass box hinges, 40 x 30mm, with a 90-degree lid stay
Cut list
The first 3 of 14 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Case bottom, oak-faced | 362 x 210 x 1214 1/4" x 8 1/4" x 1/2" | Birch plywood |
| B | 1 | Pillow deck, oak-faced | 362 x 210 x 1214 1/4" x 8 1/4" x 1/2" | Birch plywood |
| C | 1 | Drawer bottom | 338 x 189 x 613 5/16" x 7 7/16" x 1/4" | Birch plywood |
| +16 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 19 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 36 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
