
Putty linen press armoire
A tall armoire in the old linen-press shape: a deep two-drawer chest at the bottom, and above it a slightly shallower wardrobe behind a pair of full-height Shaker doors, with a hat shelf and a long brass-finished hanging rail inside. Painted warm putty, with a face frame, a cove crown and brass bar pulls, and fixed to the wall at the top.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1340 x 715 x 2200 mm52 3/4" x 28 1/8" x 86 5/8"
- Parts to cut
- 50
- Build steps
- 69
- Boards
- 6
- Sheets
- 8
- Solid wood
- 8.2 bd ft
- Weight
- 139.9 kg308 lb
Materials
- Birch plywood
- Poplar (paint grade)
- MDF
Finish
- Paint - warm putty, satin
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Pocket-hole jig
- Table saw
- Chisel
- Sandpaper
- Brush
Hardware and fittings
- 1 x Wardrobe rail, 25mm round steel tube, antique brass finish
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 4 x Side-mount drawer slide, 600mm
- 4 x Bar pull, 128mm centres, brushed brass
- 8 x Concealed face-frame hinge, partial overlay
- 1 x Cove crown moulding, 100mm
Cut list
The first 3 of 36 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Press - Side | 1780 x 547 x 1870 1/16" x 21 9/16" x 11/16" | Birch plywood |
| B | 1 | Press - Back | 1780 x 1200 x 670 1/16" x 47 1/4" x 1/4" | Birch plywood |
| C | 1 | Chest - Top | 1182 x 637 x 1846 9/16" x 25 1/16" x 11/16" | Birch plywood |
| +46 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 50 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 69 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
