
Oak bird feeding station
A freestanding white oak bird table on crossed, braced feet: a slatted feeding tray at 1.5m under a verdigris gable roof that keeps the seed dry, two arms for hanging feeders, and a dome baffle half way up the laminated post so squirrels never reach the table - it stands on a lawn or a terrace, no digging.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 830 x 760 x 1948 mm32 11/16" x 29 15/16" x 76 11/16"
- Parts to cut
- 29
- Build steps
- 28
- Boards
- 7
- Solid wood
- 13.6 bd ft
- Weight
- 44.1 kg97 lb
Materials
- White oak
Finish
- Finishing oil - Exterior hardwood oil, natural, matte
- Paint - exterior verdigris green, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Drill
- Sandpaper
- Brush
Hardware and fittings
- 2 x Black steel screw-in feeder hook, 40mm
- 1 x Galvanised mesh peanut feeder, 280mm
- 1 x Galvanised steel seed tube feeder, 280mm
- 1 x Galvanised squirrel baffle, 420mm, clamps round a 70mm post
Cut list
The first 3 of 16 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Post, half | 1500 x 70 x 3559 1/16" x 2 3/4" x 1 3/8" | White oak |
| B | 1 | Foot, side to side | 760 x 70 x 4529 15/16" x 2 3/4" x 1 3/4" | White oak |
| C | 1 | Foot, to | 760 x 70 x 4529 15/16" x 2 3/4" x 1 3/4" | White oak |
| +25 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 29 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 28 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
