
Cornflower slim rolling pantry
A pull-out pantry only 170mm wide that lives in the dead gap between the fridge and the wall: pull the brass handle and 560mm of shelves roll out on quiet castors, six levels of tins, jars and spices with maple dowel galleries so nothing slides off and a guide pin running in a channel overhead so it cannot tip. Pushed home, only a slim cornflower-blue panel shows; it adds a whole larder cupboard to a kitchen with no cupboard to spare.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 170 x 610 x 1734 mm6 11/16" x 24" x 68 1/4"
- Parts to cut
- 21
- Build steps
- 17
- Boards
- 2
- Sheets
- 1
- Solid wood
- 0.7 bd ft
- Weight
- 18.1 kg40 lb
Materials
- Hard maple
- Birch plywood
Finish
- Paint - cornflower blue, satin
- Finishing oil - Hardwax oil, matt
Tools
- Saw
- Square
- Tape
- Router
- Drill
- Clamps
- Sandpaper
- Brush
Hardware and fittings
- 1 x Brushed brass bar pull, 320mm centres
- 1 x Anti-tip top guide for a pull-out: aluminium U-channel 600mm with a nylon guide pin
- 4 x Low-profile swivel castor, 40mm soft wheel, plate fixing
Cut list
The first 3 of 5 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Panel | 1650 x 170 x 1864 15/16" x 6 11/16" x 11/16" | Birch plywood |
| B | 1 | Top | 542 x 170 x 1821 5/16" x 6 11/16" x 11/16" | Birch plywood |
| C | 1 | Bottom shelf | 536 x 170 x 1821 1/8" x 6 11/16" x 11/16" | Birch plywood |
| +17 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 21 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 17 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
