
Walnut drinks cabinet
A tall mid-century drinks cabinet in oiled black walnut on slim legs: glass doors with brass knobs over shelves lit by warm LED strips for bottles and coupes, a wide drawer for bar tools below, and a solid walnut top that overhangs a touch for mixing on.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1040 x 488 x 1520 mm40 15/16" x 19 3/16" x 59 13/16"
- Parts to cut
- 34
- Build steps
- 47
- Boards
- 11
- Sheets
- 2
- Solid wood
- 41.4 bd ft
- Weight
- 81.3 kg179 lb
Materials
- Black walnut
- Birch plywood
Finish
- Finishing oil - Danish oil, satin
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Table saw
- Chisel
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 2 x Side-mount drawer slide, 400mm
- 3 x Round knob, 30mm, brushed brass
- 6 x Concealed cabinet hinge, full overlay
- 1 x Plug-in LED strip kit, 12V, warm white 2700K
- 2 x Toughened glass panel, 4mm
Cut list
The first 3 of 23 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Bar - Back | 1025 x 1000 x 640 3/8" x 39 3/8" x 1/4" | Birch plywood |
| B | 2 | Drawer - Drawer 1 box | 926.5 x 130 x 1236 1/2" x 5 1/8" x 1/2" | Birch plywood |
| C | 1 | Drawer - Drawer 1 bottom | 926.5 x 388 x 636 1/2" x 15 1/4" x 1/4" | Birch plywood |
| +30 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 34 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 47 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
