
Claret china hutch
A freestanding china hutch in deep claret red: glass-fronted cabinets lit inside from top to bottom, standing back on a deeper base of Shaker cupboards and a bank of silverware drawers, under a cove crown with brass knobs and cup pulls.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1726 x 531 x 2250 mm67 15/16" x 20 7/8" x 88 9/16"
- Parts to cut
- 118
- Build steps
- 113
- Boards
- 13
- Sheets
- 9
- Solid wood
- 17.9 bd ft
- Weight
- 195.2 kg430 lb
Materials
- Birch plywood
- Poplar (paint grade)
- MDF
Finish
- Paint - deep claret, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Table saw
- Drill
- Pocket-hole jig
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x Anti-tip furniture wall bracket, steel, with stud screws
- 13 x Concealed face-frame hinge, partial overlay
- 5 x Round knob, 30mm, brushed brass
- 3 x Plug-in LED strip kit, 12V, warm white 2700K
- 2 x Toughened glass panel, 4mm
- 6 x Side-mount drawer slide, 450mm
- 3 x Cup pull, 96mm centres, brushed brass
- 1 x Toughened glass panel, 4mm
- 1 x Cove crown moulding, 90mm
Cut list
The first 3 of 83 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Glass left - Side | 1370 x 295 x 1853 15/16" x 11 5/8" x 11/16" | Birch plywood |
| B | 1 | Glass left - Back | 1370 x 500 x 653 15/16" x 19 11/16" x 1/4" | Birch plywood |
| C | 2 | Glass M - Side | 1370 x 295 x 1853 15/16" x 11 5/8" x 11/16" | Birch plywood |
| +113 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 118 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 113 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
