
Cherry plate rack wall
A cottage kitchen wall boarded in sage tongue-and-groove, hung with an oiled cherry plate rack - plates standing between rows of dowels, a shelf for bowls, a brass mug rail and a scooped cornice - beside two cherry shelves on cove-cut brackets, over a Shaker peg rail.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 2400 x 310 x 2250 mm94 1/2" x 12 3/16" x 88 9/16"
- Parts to cut
- 100
- Build steps
- 38
- Boards
- 45
- Sheets
- 2
- Solid wood
- 74 bd ft
- Weight
- 132.7 kg293 lb
Materials
- Cherry
- Poplar (paint grade)
- Pine (eastern white)
- MDF
Finish
- Finishing oil - Hardwax oil, satin
- Paint - soft sage, eggshell
- Paint - warm white, matte
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Chisel
- Drill
- Sandpaper
- Brush
Hardware and fittings
- 1 x Solid brass rod, 19mm, with S-hooks
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
Cut list
The first 3 of 20 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Peg rail | 2280 x 90 x 2289 3/4" x 3 9/16" x 7/8" | Cherry |
| B | 1 | Rack top | 1030 x 195 x 2240 9/16" x 7 11/16" x 7/8" | Cherry |
| C | 2 | Plate rail | 984 x 30 x 2038 3/4" x 1 3/16" x 13/16" | Cherry |
| +96 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 100 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 38 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
