
Charcoal home bar
A charcoal home bar wall with glass-fronted cabinets for the glassware, each shelf lit by a warm LED strip. Open bottle shelves glow in the middle over a drawer bank for the bar tools. Shaker cupboards below have brass bar pulls, under a cove crown.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 2326 x 532 x 2250 mm91 9/16" x 20 15/16" x 88 9/16"
- Parts to cut
- 99
- Build steps
- 86
- Boards
- 1
- Sheets
- 12
- Solid wood
- 1.5 bd ft
- Weight
- 241.9 kg533 lb
Materials
- Birch plywood
- MDF
- Poplar (paint grade)
Finish
- Paint - Charcoal, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Table saw
- Drill
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 20 x Concealed cabinet hinge, full overlay
- 7 x Bar pull, 128mm centres, brushed brass
- 3 x Plug-in LED strip kit, 12V, warm white 2700K
- 4 x Toughened glass panel, 4mm
- 4 x Round knob, 30mm, brushed brass
- 6 x Side-mount drawer slide, 450mm
- 1 x Cove crown moulding, 90mm
Cut list
The first 3 of 73 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Left glass - Side | 1350 x 316 x 1853 1/8" x 12 7/16" x 11/16" | Birch plywood |
| B | 1 | Left glass - Back | 1350 x 700 x 653 1/8" x 27 9/16" x 1/4" | Birch plywood |
| C | 2 | Middle open - Side | 1350 x 334 x 1853 1/8" x 13 1/8" x 11/16" | Birch plywood |
| +94 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 99 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 86 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.