
Blue-grey headboard wall
A wall-to-wall built-in around the bed, painted the same deep blue-grey as the room: bedside towers with two drawers and lit open shelves, cupboards bridging over the top under a cove crown, and a channel-tufted rust velvet headboard set into the alcove. Brass swing-arm reading lights reach in from each tower, so the nightstands stay clear.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 3200 x 541 x 2400 mm126" x 21 5/16" x 94 1/2"
- Parts to cut
- 151
- Build steps
- 125
- Boards
- 11
- Sheets
- 14
- Solid wood
- 19.6 bd ft
- Weight
- 310 kg683 lb
Materials
- Birch plywood
- Poplar (paint grade)
- MDF
- Pine (eastern white)
Finish
- Paint - deep blue-grey, eggshell
- Paint - charcoal, matte
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Pocket-hole jig
- Table saw
- Chisel
- Dowel jig
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 8 x Upholstered channel: 50mm foam on 9mm ply, wrapped in rust cotton velvet
- 8 x Side-mount drawer slide, 400mm
- 8 x Round knob, 30mm, brushed brass
- 2 x Plug-in LED strip kit, 12V, warm white 2700K
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 8 x Concealed face-frame hinge, partial overlay
- 1 x Cove crown moulding, 100mm
- 2 x Plug-in swing-arm reading light, brushed brass
Cut list
The first 3 of 91 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Shelves left - Side | 1840 x 315 x 1872 7/16" x 12 3/8" x 11/16" | Birch plywood |
| B | 1 | Shelves left - Back | 1840 x 650 x 672 7/16" x 25 9/16" x 1/4" | Birch plywood |
| C | 2 | Shelves right - Side | 1840 x 315 x 1872 7/16" x 12 3/8" x 11/16" | Birch plywood |
| +146 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 151 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 125 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
