
Birch room divider with fold-out desk
A double-sided birch plywood room divider 1200mm wide and 400mm deep that splits a studio into living and working halves, with an ink-black desk box set into one column: its front folds down on brass stays to an 800mm-deep lino-topped desk at 740mm, lit inside by a warm strip. Shelves open to both sides, so the wall it replaces still lets the light through.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 1200 x 820 x 1803 mm47 1/4" x 32 5/16" x 71"
- Parts to cut
- 26
- Build steps
- 37
- Sheets
- 4
- Weight
- 79.2 kg175 lb
Materials
- Birch plywood
Finish
- Paint - ink black, satin
- Clear finish - Water-based lacquer, matt
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x Furniture linoleum, 2mm, putty
- 1 x Brass piano hinge, 32mm open width
- 2 x Brass lid stay, soft-down, 300mm
- 1 x Push-to-open magnetic touch latch
- 1 x Anti-tip furniture strap, steel cable
- 1 x Plug-in LED strip kit, 12V, warm white 2700K
Cut list
The first 3 of 19 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Tower - Side | 1800 x 400 x 1870 7/8" x 15 3/4" x 11/16" | Birch plywood |
| B | 2 | Low - Side | 722 x 400 x 1828 7/16" x 15 3/4" x 11/16" | Birch plywood |
| C | 2 | Up - Side | 618 x 400 x 1824 5/16" x 15 3/4" x 11/16" | Birch plywood |
| +20 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 26 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 37 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
