
Walnut nightstand pair
A pair of mid-century nightstands in oiled black walnut, one each side of the bed: a slim drawer with a brushed brass edge pull over an open shelf for books, on four square legs, under a thicker top with a soft rounded edge. Small enough to build in a weekend, and they lift a bedroom on their own.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 2760 x 436 x 602 mm108 11/16" x 17 3/16" x 23 11/16"
- Parts to cut
- 42
- Build steps
- 33
- Boards
- 7
- Sheets
- 2
- Solid wood
- 24.1 bd ft
- Weight
- 47.2 kg104 lb
Materials
- Black walnut
- Birch plywood
Finish
- Finishing oil - Hardwax oil, satin
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Table saw
- Sandpaper
- Brush
Hardware and fittings
- 4 x Side-mount drawer slide, 350mm
- 2 x Edge pull, 150mm, brushed brass
Cut list
The first 3 of 27 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Drawer left - Drawer 1 box | 446.5 x 110 x 1217 9/16" x 4 5/16" x 1/2" | Birch plywood |
| B | 1 | Drawer left - Drawer 1 bottom | 446.5 x 338 x 617 9/16" x 13 5/16" x 1/4" | Birch plywood |
| C | 2 | Drawer right - Drawer 1 box | 446.5 x 110 x 1217 9/16" x 4 5/16" x 1/2" | Birch plywood |
| +37 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 42 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 33 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
