
Walnut library with a desk niche
A four-and-a-half-metre library wall in solid oiled walnut, with frame-and-panel doors and face frames, a cove crown and a brass picture light over every bay. In the middle a writing desk is tucked into a niche lined in cognac leather, between two brass reading lamps, and a walnut ladder rolls the whole length on a black rail.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 4500 x 1039 x 2700 mm177 3/16" x 40 7/8" x 106 5/16"
- Parts to cut
- 185
- Build steps
- 138
- Boards
- 70
- Sheets
- 8
- Solid wood
- 291 bd ft
- Weight
- 570 kg1257 lb
Materials
- Black walnut
- Birch plywood
Finish
- Finishing oil - Hardwax oil, satin
- Paint - cognac leather, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Table saw
- Drill
- Pocket-hole jig
- Dowel jig
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 1 x Cognac vegetable-tanned leather, for wrapping the niche back panel
- 16 x Concealed face-frame hinge, partial overlay
- 9 x Round knob, 30mm, brushed brass
- 4 x Plug-in picture light, brass, 450mm
- 2 x Side-mount drawer slide, 450mm
- 2 x Plug-in picture light, brass, 300mm
- 1 x Cove crown moulding, 110mm
- 1 x Library ladder rail kit, matt black, 32mm rail
- 1 x Library ladder, black walnut, 8 ft (2440mm), 410mm wide
- 1 x Library ladder hooks and floor wheels, matt black
- 2 x Plug-in swing-arm reading light, brushed brass
Cut list
The first 3 of 131 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Upper 1 - Back | 1820 x 850 x 671 5/8" x 33 7/16" x 1/4" | Birch plywood |
| B | 1 | Upper 2 - Back | 1820 x 850 x 671 5/8" x 33 7/16" x 1/4" | Birch plywood |
| C | 1 | Upper 3 - Back | 1820 x 850 x 671 5/8" x 33 7/16" x 1/4" | Birch plywood |
| +182 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 185 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 138 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
