
Chocolate music room wall
A music room wall drenched in chocolate brown: two towers of LP-sized cubes for a record collection, lit shelves above them, and between them a walnut-topped console with an open amplifier bay and drawers for pedals and cables. Over the console, a walnut rail carries three brass guitar hangers, and a slim ledge shows the record that is playing.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 3800 x 511 x 2500 mm149 5/8" x 20 1/8" x 98 7/16"
- Parts to cut
- 87
- Build steps
- 83
- Boards
- 5
- Sheets
- 13
- Solid wood
- 13.9 bd ft
- Weight
- 309.7 kg683 lb
Materials
- Birch plywood
- Black walnut
- MDF
Finish
- Finishing oil - Hardwax oil, satin
- Paint - chocolate brown, eggshell
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Table saw
- Sandpaper
- Brush
- 10mm bit
- Cable clips
Hardware and fittings
- 3 x Brass guitar wall hanger with padded yoke
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 2 x Plug-in LED strip kit, 12V, warm white 2700K
- 6 x Side-mount drawer slide, 400mm
- 3 x Round knob, 30mm, brushed brass
Cut list
The first 3 of 59 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Shelves left - Side | 1280 x 314 x 2450 3/8" x 12 3/8" x 15/16" | Birch plywood |
| B | 1 | Shelves left - Back | 1280 x 1100 x 650 3/8" x 43 5/16" x 1/4" | Birch plywood |
| C | 2 | Shelves right - Side | 1280 x 314 x 2450 3/8" x 12 3/8" x 15/16" | Birch plywood |
| +82 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 87 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 83 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
