
Teal panelled toy chest
A frame-and-panel toy chest in faded teal with an oiled oak lid that doubles as a bench, built so it can never shut on a child: soft-close stays hold the lid at any angle, and rubber bumpers stop it 12mm above the frame, which also lets air in. Rope handles, a raised floor on cleats and posts mortised to every rail keep it square for a lifetime of toys.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 932 x 460 x 464 mm36 11/16" x 18 1/8" x 18 1/4"
- Parts to cut
- 22
- Build steps
- 27
- Boards
- 4
- Sheets
- 2
- Solid wood
- 9.1 bd ft
- Weight
- 22.1 kg49 lb
Materials
- Poplar (paint grade)
- Birch plywood
- White oak
Finish
- Paint - faded teal, toy-safe water-based, satin
- Clear finish - Water-based clear lacquer, matt, toy-saf, matte
- Finishing oil - Hardwax oil, matt, toy-safe, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Router
- Table saw
- Drill
- Sandpaper
- Brush
Hardware and fittings
- 2 x Cotton rope, 16mm, natural
- 4 x Screw-in rubber bumpers, 20mm, 12mm tall
- 2 x Soft-close toy box lid stay, child safe, holds open at any angle
- 2 x Strap hinge, 70mm, matt black
Cut list
The first 3 of 15 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Panel | 828 x 256 x 932 5/8" x 10 1/16" x 3/8" | Birch plywood |
| B | 1 | Chest floor | 812 x 396 x 1831 15/16" x 15 9/16" x 11/16" | Birch plywood |
| C | 2 | Panel | 392 x 256 x 915 7/16" x 10 1/16" x 3/8" | Birch plywood |
| +18 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 22 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 27 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
