
Eucalyptus loft bed with desk
A single loft bed on oiled maple posts with a two-metre desk and a book shelf tucked underneath, so one 2.1 x 1m footprint does the work of a bed, a desk and a bookcase. Built safe: eucalyptus-green guard panels stand 180mm above the 150mm mattress all round, the straight ladder runs up past the deck as handholds, and both back posts are fixed to the wall; for children six and over, in a room with a ceiling of at least 2400mm.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 2110 x 1048 x 1830 mm83 1/16" x 41 1/4" x 72 1/16"
- Parts to cut
- 33
- Build steps
- 41
- Boards
- 14
- Sheets
- 3
- Solid wood
- 33 bd ft
- Weight
- 198.6 kg438 lb
Materials
- Hard maple
- Birch plywood
Finish
- Finishing oil - Hardwax oil, matt
- Clear finish - Water-based lacquer, matt
- Paint - eucalyptus green, satin
Tools
- Saw
- Square
- Tape
- Chisel
- Clamps
- Drill
- Sandpaper
- Brush
Hardware and fittings
- 1 x Your single mattress, 900 x 2000mm, NO thicker than 150mm (not part of this build)
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
Cut list
The first 3 of 19 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Deck | 2020 x 936 x 1879 1/2" x 36 7/8" x 11/16" | Birch plywood |
| B | 1 | Guard panel | 2020 x 330 x 1879 1/2" x 13" x 11/16" | Birch plywood |
| C | 1 | Desk top | 2020 x 600 x 1879 1/2" x 23 5/8" x 11/16" | Birch plywood |
| +30 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 33 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 41 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
