Open Crava
Sage nursery changing dresser, a rendering
A rendering of this design, made with AI from its 3D model. The plans are what is exact.
  • Kids
  • Nursery
  • Changing table
  • Dresser
  • Painted
  • Maple
  • Storage

Sage nursery changing dresser

A soft sage nursery dresser that changes a baby now and holds a toddler’s clothes later: two seagrass baskets in open cubbies at the bottom, two deep drawers, and an oiled maple top with a raised changing tray, guarded on all four sides, holding a contoured pad. Every edge is rounded and it is fixed to the wall.

Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.

At a glance

Overall W x D x H
1030 x 545 x 1045 mm40 9/16" x 21 7/16" x 41 1/8"
Parts to cut
29
Build steps
46
Boards
3
Sheets
5
Solid wood
9.4 bd ft
Weight
116.2 kg256 lb

Materials

Finish

Tools

Hardware and fittings

Cut list

The first 3 of 22 lines, in millimetres (inches below), finished size including joint allowances.

LetterQtyPartL x W x TMaterial
A1Cubbies - Top982 x 514 x 1838 11/16" x 20 1/4" x 11/16"Birch plywood
B1Drawers - Bottom982 x 496 x 1838 11/16" x 19 1/2" x 11/16"Birch plywood
C1Drawers - Top982 x 496 x 1838 11/16" x 19 1/2" x 11/16"Birch plywood
+26 more parts

Open this design in Crava to see the full cut list and plans - all 29 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 46 build steps in order.

Open in Crava

Opening and changing a design needs no account. The full plans come with a free one.

The 3D model

Sage nursery changing dresser, Crava's 3D model
What Crava draws, plans and checks: open it to turn it around, look inside and change it.

More kids designs

All designs