
Coral two-step stool for kids
A two-step stool that lets a small child reach the bathroom basin or the kitchen counter on their own: 210mm and 420mm treads on a 380mm-deep base, sides arched between the feet so it stands on four rubber pads and never rocks. Every corner is rounded to 30mm, the maple treads carry grip strips, and a riser and two rails are housed in both sides so it cannot rack.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 420 x 380 x 425 mm16 9/16" x 14 15/16" x 16 3/4"
- Parts to cut
- 7
- Build steps
- 16
- Boards
- 1
- Sheets
- 1
- Solid wood
- 1.4 bd ft
- Weight
- 6.7 kg15 lb
Materials
- Birch plywood
- Hard maple
Finish
- Paint - soft coral, toy-safe water-based, satin
- Finishing oil - Hardwax oil, matt, toy-safe, satin
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Sandpaper
- Brush
Hardware and fittings
- 1 x Clear anti-slip tread tape, 25mm
- 4 x Non-slip rubber feet, 18 x 60mm, screw-on
Cut list
The first 3 of 6 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Side | 423.5 x 380 x 1816 11/16" x 14 15/16" x 11/16" | Birch plywood |
| B | 1 | Riser | 396 x 196 x 1815 9/16" x 7 11/16" x 11/16" | Birch plywood |
| C | 1 | Rail | 396 x 90 x 1815 9/16" x 3 9/16" x 11/16" | Birch plywood |
| +3 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 7 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 16 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
