
Powder blue kitchen helper tower
A kitchen helper tower that brings a toddler safely up to counter height to stir, wash and watch: a standing platform that moves between three cleat heights as they grow, a back step to climb in by, and maple safety rails on three sides. The sides splay from 380mm at the top to 520mm on the floor, so it is far harder to push over than a stool.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 460 x 520 x 903 mm18 1/8" x 20 1/2" x 35 9/16"
- Parts to cut
- 15
- Build steps
- 20
- Boards
- 2
- Sheets
- 1
- Solid wood
- 1 bd ft
- Weight
- 14.7 kg32 lb
Materials
- Hard maple
- Birch plywood
Finish
- Paint - powder blue, toy-safe water-based, satin
- Finishing oil - Hardwax oil, matt, toy-safe, satin
- Clear finish - Water-based clear lacquer, matt, toy-saf, matte
Tools
- Saw
- Square
- Tape
- Router
- Clamps
- Drill
- Sandpaper
- Brush
Hardware and fittings
- 1 x Cork-rubber grip mat, 3mm
- 4 x Non-slip rubber feet, 18 x 60mm, screw-on
Cut list
The first 3 of 10 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 2 | Side | 900 x 520 x 1835 7/16" x 20 1/2" x 11/16" | Birch plywood |
| B | 1 | Climbing step | 436 x 120 x 1817 3/16" x 4 3/4" x 11/16" | Birch plywood |
| C | 1 | Step riser | 436 x 150 x 1817 3/16" x 5 7/8" x 11/16" | Birch plywood |
| +11 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 15 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 20 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
