• Living room
• Oak
• Glass
• Storage

Record console

A crisp mid-century console in oiled white oak — glass doors, open turntable bay, and brass details that sing against the charcoal wall.

Open this design in Crava

Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.

At a glance

Overall W x D x H

1500 x 438 x 600 mm59 1/16" x 17 1/4" x 23 5/8"

Parts to cut

13

Build steps

23

Boards

3

Sheets

2

Solid wood

9.5 bd ft

Weight

46.1 kg102 lb

Materials

• White oak
• Birch plywood

Finish

• Finishing oil, satin

Tools

• Saw
• Square
• Tape
• Router
• Clamps
• Drill
• Table saw
• Sandpaper
• Brush

Hardware and fittings

• 1 x Brass levelling foot
• 1 x Brass knife-pivot hinges
• 1 x Toughened glass panel
• 1 x Brass bar handle

Cut list

The first 3 of 7 lines, in millimetres (inches below), finished size including joint allowances.

The 3D model

More living room designs

• Maple hi-fi console A listening-room set in solid hard maple: a low, open hi-fi console built from 40mm-thick boards - chunky end slabs, thick housed shelves and staggered partitions for the amp, the turntable and the records - with a pair of matching speaker plinths, each floating on a dark recessed foot, that lift the speakers to ear height. Finished in an amber-tinted oil that gives the pale maple a honeyed glow.
• Butter yellow window bookcase A long, low bookcase that runs under a pair of windows, painted a soft butter yellow, its open bays divided by little fluted pilasters and finished with a continuous oiled oak top - deep enough for a row of plants and a cushion to perch on.
• Black and oak aquarium stand A stand for a 300 litre aquarium: a soft black painted case with 24mm sides and a middle pair taking the weight, four slab doors with brass edge pulls hiding the filter and supplies, on a shadow-gap kick, under a natural oiled white oak top that frames the glass.

All designs