• Hallway
• Oak
• Table

Oak hall console

A slim white oak console for a hallway: long tapered legs, light aprons, and a top just deep enough for keys and a lamp. Fix it to the wall - it is tall for its depth.

Open this design in Crava

Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.

At a glance

Overall W x D x H

1200 x 340 x 800 mm47 1/4" x 13 3/8" x 31 1/2"

Parts to cut

9

Build steps

11

Boards

3

Solid wood

8.7 bd ft

Weight

13.7 kg30 lb

Materials

• White oak

Finish

• Finishing oil

Tools

• Saw
• Square
• Tape
• Chisel
• Clamps
• Router
• Drill
• Sandpaper
• Brush

Cut list

The first 3 of 4 lines, in millimetres (inches below), finished size including joint allowances.

The 3D model

More entry & mudroom designs

• Mustard arched lift-lid hall bench A hall bench for an entry with no room for a cupboard, only 360mm deep: its oiled oak seat lifts on soft-close stays to a box for hats, gloves and the dog lead, and an arched mustard backboard rises behind it with four brass hooks on an oak rail. Seat, storage and coat rack in 900mm of wall, fixed at the top so it never tips.
• Slate reeded hall wainscot with radiator cover A hall radiator that disappears into the panelling: slate-green reeded wainscot to 1m either side, and between them a cover with a grille of rounded slats that lets the heat out, under a deep oiled oak shelf that stops short of the wall so warm air rises up the slot behind it. The shelf becomes the hall's landing spot for keys, post and a lamp, and the cover lifts off in one piece to bleed the radiator.
• Slate blue under-stair storage Built-in storage that fills the space under a staircase, stepping up with it: deep drawers at the low end, an open bay for books and baskets, then tall Shaker cupboards for coats and the vacuum, all in slate blue-grey with brass pulls, and painted infill panels cut to the line of the stair.

All designs