
Slate reeded hall wainscot with radiator cover
A hall radiator that disappears into the panelling: slate-green reeded wainscot to 1m either side, and between them a cover with a grille of rounded slats that lets the heat out, under a deep oiled oak shelf that stops short of the wall so warm air rises up the slot behind it. The shelf becomes the hall's landing spot for keys, post and a lamp, and the cover lifts off in one piece to bleed the radiator.
Passes Crava's checks for fit, strength and stability. Change any size, the wood or the finish in the app, and it is checked again.
At a glance
- Overall W x D x H
- 3000 x 255 x 1025 mm118 1/8" x 10 1/16" x 40 3/8"
- Parts to cut
- 118
- Build steps
- 31
- Boards
- 36
- Sheets
- 2
- Solid wood
- 20.6 bd ft
- Weight
- 50.7 kg112 lb
Materials
- Poplar (paint grade)
- MDF
- Pine (eastern white)
- White oak
Finish
- Finishing oil - Hardwax oil, matt
- Paint - slate green, satin
- Paint - warm white, matte
Tools
- Saw
- Square
- Tape
- Pocket-hole jig
- Drill
- Dowel jig
- Clamps
- Sandpaper
- Brush
Hardware and fittings
- 2 x Anti-tip furniture wall bracket, steel, with stud screws
- 4 x Anti-tip furniture wall bracket, steel, with stud screws
Cut list
The first 3 of 13 lines, in millimetres (inches below), finished size including joint allowances.
| Letter | Qty | Part | L x W x T | Material |
|---|---|---|---|---|
| A | 1 | Cover kick rail | 1164 x 100 x 1845 13/16" x 3 15/16" x 11/16" | MDF |
| B | 1 | Cover top rail | 1164 x 90 x 1845 13/16" x 3 9/16" x 11/16" | MDF |
| C | 2 | Cover side | 1000 x 230 x 1839 3/8" x 9 1/16" x 11/16" | MDF |
| +114 more parts | ||||
Open this design in Crava to see the full cut list and plans - all 118 parts, cutting diagrams for every board and sheet, a drawing of each part, and the 31 build steps in order.
Open in CravaOpening and changing a design needs no account. The full plans come with a free one.
The 3D model
